High thixotropy PVC-25 pressure-sensitive adhesive glue, quick drying, 500ml

It is a welding adhesive for joining flexible PVC pipes and materials. Suitable for strong joints of flexible pipes, sleeves and PVC pipe elbows in pressure systems. It complies with UNE-EN 14814 and UNE-UN 14680 standards. INSTRUCTIONS FOR USE Clean and degrease the surface to be glued. Apply a thin, uniform layer of adhesive to the sleeve and a thicker layer to the end of the previously bevelled pipe. Remove excess adhesive with a cloth. The gluing operation must be carried out within a maximum time of one minute from the application of the adhesive. The gluing must not be subjected to stress or movement before the first 5 minutes. The pressure to which the PVC pipe can be subjected is estimated at approximately 1 Kg/cm2 for each hour elapsed since the joint. It is a FLAMMABLE product. Therefore, good ventilation must be available in the workplace and any possibility of sparks or fire must be avoided. For more information, consult the product Safety Data Sheet.

Product Features:

• It is a welding adhesive for flexible PVC


• Suitable for resistant joints in pressure systems


• Complies with UNE-EN 14814 and UNE-UN 14680 standards


• Fast drying and high thixotropy

Frequently Asked Questions:

*How should the adhesive be applied to obtain the best bond?*
Clean and degrease the surface, apply a thin layer to the sleeve and a thicker layer to the end of the tube. Make the bond within one minute and do not subject to stress before 5 minutes.

*How much pressure can PVC pipe withstand after joining?*
It is estimated at approximately 1 Kg/cm2 for each hour elapsed since joining.

*Is it safe to use this adhesive indoors?*
No, it is flammable, good ventilation and avoiding sparks or fire is recommended.

*Is this adhesive suitable for materials other than PVC?*
No, it is specifically designed for flexible PVC.

*What is the drying capacity of this adhesive?*
Fast drying in approximately 5 minutes.