Glue adhesive welder with high thixotropy, PVC-25 pressure, fast drying 1000 ml

It is a welding adhesive for joining flexible PVC pipes and materials. Suitable for strong joints of flexible pipes, sleeves and PVC pipe elbows in pressure systems. It complies with UNE-EN 14814 and UNE-UN 14680 standards. INSTRUCTIONS FOR USE Clean and degrease the surface to be glued. Apply a thin, uniform layer of adhesive to the sleeve and a thicker layer to the end of the previously bevelled pipe. Remove excess adhesive with a cloth. The gluing operation must be carried out within a maximum time of one minute from the application of the adhesive. The gluing must not be subjected to stress or movement before the first 5 minutes. The pressure to which the PVC pipe can be subjected is estimated at approximately 1 Kg/cm2 for each hour elapsed since the joint. It is a FLAMMABLE product. Therefore, good ventilation must be available in the workplace and any possibility of sparks or fire must be avoided. For more information, consult the product Safety Data Sheet.

Product Features:

• It is a welding adhesive for flexible PVC.


• Suitable for strong joints of flexible pipe, sleeves and PVC pipe elbows in pressure systems.


• Complies with UNE-EN 14814 and UNE-UN 14680 standards.


• Fast drying and high thixotropy.

Frequently Asked Questions:

How should welding adhesive be applied?
*SEO-friendly answer 1*

What standards does this product meet?
*SEO-friendly answer 2*

What safety precautions should be taken when using this sticker?
*SEO-friendly Answer 3*

How long should you wait before applying pressure to the joint?
*SEO-friendly answer 4*

Can this adhesive be used on other materials besides PVC?
*SEO-friendly answer 5*