B-Water Clean 400mm Pool Sand Filter with 0.35 HP 6 m3/h Pump - BAE127656

Keeping your pool water crystal clear and ready for swimming all season long is easier with this compact and efficient filtration system. Designed specifically for residential pools, this monobloc offers a complete solution that combines pump and filter into a single high-performance unit, ensuring optimal filtration and hassle-free maintenance.

Maximum efficiency in the purification of your swimming pool

This filtration system stands out for its excellent ability to retain suspended particles, leaves, and impurities thanks to its 400 mm diameter tank. Its 0.35 HP pump provides a flow rate of 6 m³/h, ensuring constant water renewal in small and medium-sized pools. Its compact design facilitates installation in utility rooms or confined spaces, maximizing every inch.

Technical Specifications of the Monobloc B-Water Clean 400mm

• Product reference: BAE127656.


• Filter diameter: 400 mm.


• Pump power: 0.35 HP.


• Maximum flow rate: 6 m3/h.


• Installation type: Pre-assembled monobloc on a sturdy plastic base.


• Selector valve: Included to facilitate washing, rinsing and filtering tasks.


• Recommended use: Removable, above-ground or in-ground residential swimming pools.

Frequently Asked Questions about the filtration system

How much filter media does this filter require?

This 400 mm model generally requires silica sand or glass filter media to operate. The exact amount is usually around 25 to 35 kg, depending on the chosen particle size, ensuring effective dirt retention.

Is this monobloc unit easy to install?

Yes, because it comes pre-installed on a base that connects the pump and filter, connecting it to the pool via hoses or pipes is quick and easy. You only need to make the basic hydraulic connections and connect it to a protected electrical supply.

How often should backwashing be performed?

It is recommended to backwash or backwash the sand at least once a week during the months of highest use, or when the pressure gauge indicates that the pressure has risen due to the accumulation of dirt inside the tank.