3/4" collector arm for swimming pools, 160 mm. Groove gauge 0.3 mm. (Pack of 8)

Collector arm for sand pool filters. The function of the strainers is to collect the water from the bottom of the filter once it has been filtered. During backwashing, they lift the filter media and remove the debris retained in the filter system. It is recommended to completely empty the filter media from your pool filter every 8-10 years and check the strainers. Slot diameter: 0.3 mm.

Product features:

• For sand pool filters.


• The function of the filter nozzles is to collect the water from the bottom of the filter once it has been filtered.


• During filter washing, they are responsible for lifting the filter load and evacuating the waste retained in the treatment plant.


• Every so often (8-10 years) it is recommended to completely empty the filter media of your pool filter and check the existing filter nozzles.


• Slot gauge: 0.3 mm.

Frequently Asked Questions:

Is the collector arm for sand pool filters compatible with all models?
Yes, the collector arm is compatible with most sand pool filter models on the market.

How often is it recommended to check the pool filter nozzles?
It is recommended to check the pool filter nozzles every 8-10 years to ensure they are working properly.

Is it necessary to completely empty the filter media from the pool filter?
Yes, it is recommended to completely empty the filter media from the pool filter every so often to maintain its effectiveness.

What size groove gauge does the pool collector arm have?
The collector arm has a slot gauge of 0.3 mm for efficient filtration.

Can the crepe cutters be purchased separately if they become worn?
Yes, the filter nozzles can be purchased separately in case of wear or breakage to maintain the optimal functioning of the pool filter.