- New
PVC-50 Welding Adhesive | Pipe Glue 500 ml
€14.95
Impuestos incluidos
- Easy-to-apply adhesive that provides strong bonds resistant to attack from aggressive products and aging.
- Complies with UNE-EN 14814 and UNE-UN 14680 standards
- It is a welding adhesive for joining rigid PVC pipes and materials, of particular interest for PRESSURE systems.
- Clean and degrease the surfaces to be bonded. Apply a thin, even layer of adhesive to the sleeve and then a thicker layer to the beveled end of the tube. Make the joint immediately without twisting. Remove any excess adhesive with a cloth. The bond should not be subjected to stress or movement for the first 10 minutes.
- Depending on the ambient temperature and the aeration of the joint, the adhesive sets approximately 4 hours after application. In installations that must withstand pressures exceeding 1.5 atm, wait at least 24 hours before putting them into service. The bond strength can be estimated up to material failure, not joint failure.
- This product is FLAMMABLE. Therefore, good ventilation must be provided in the workplace, and all sources of sparks or fire must be avoided. For more information, consult the Safety Data Sheet.
PVC-50 Welding Adhesive | Pipe Glue 500 ml
This easy-to-apply adhesive provides strong, resistant bonds that withstand aggressive products and aging. It complies with UNE-EN 14814 and UNE-UN 14680 standards. It is a welding adhesive for joining rigid PVC pipes and materials, particularly suitable for pressure systems. Clean and degrease the surfaces to be bonded. Apply a thin, even layer of adhesive to the sleeve and then a thicker layer to the beveled end of the pipe. Make the joint immediately without twisting. Remove any excess adhesive with a cloth. The bond should not be subjected to stress or movement for the first 10 minutes. Depending on the ambient temperature and ventilation of the joint, the adhesive will set approximately 4 hours after application. In installations that must withstand pressures exceeding 1.5 atm, wait at least 24 hours before putting them into service. The bond strength is estimated up to material failure, not joint failure. This product is FLAMMABLE. Therefore, good ventilation must be provided in the workplace, and all sources of sparks or fire must be avoided. For more information, consult the Safety Data Sheet.
Product features:
- Easy-to-apply adhesive.
- Resistant to attack by aggressive products.
- Complies with UNE-EN 14814 and UNE-UN 14680 standards.
- Ideal for PRESSURE systems.
Frequently Asked Questions:
How should the adhesive be applied?
Apply a thin, even layer to the sleeve and a thicker layer to the previously beveled end of the tube.
How long does it take for the adhesive to set?
The adhesive sets approximately 4 hours after application, depending on the ambient temperature and aeration of the joint.
What precautions should I take when using this product?
It is important to have good ventilation in the workplace and avoid possible sparks or fire because the product is flammable.
How long should I wait before putting the facilities into service?
In installations that must withstand pressures above 1.5 atm, it is recommended to wait at least 24 hours before putting them into service.
What standards does this welding adhesive meet?
It complies with UNE-EN 14814 and UNE-UN 14680 standards to guarantee its quality and resistance in rigid PVC joints.
B10492244
398 Items
Data sheet
- Color
- Blanco - Azul
No customer reviews for the moment.
You might also like
Customers who bought this product also bought:
16 other products in the same category:
- Easy-to-apply adhesive that provides strong bonds resistant to attack from aggressive products and aging.
- Complies with UNE-EN 14814 and UNE-UN 14680 standards
- It is a welding adhesive for joining rigid PVC pipes and materials, of particular interest for PRESSURE systems.
- Clean and degrease the surfaces to be bonded. Apply a thin, even layer of adhesive to the sleeve and then a thicker layer to the beveled end of the tube. Make the joint immediately without twisting. Remove any excess adhesive with a cloth. The bond should not be subjected to stress or movement for the first 10 minutes.
- Depending on the ambient temperature and the aeration of the joint, the adhesive sets approximately 4 hours after application. In installations that must withstand pressures exceeding 1.5 atm, wait at least 24 hours before putting them into service. The bond strength can be estimated up to material failure, not joint failure.
- This product is FLAMMABLE. Therefore, good ventilation must be provided in the workplace, and all sources of sparks or fire must be avoided. For more information, consult the Safety Data Sheet.
PVC-50 Welding Adhesive | Pipe Glue 500 ml
€14.95
Impuestos incluidos