3/4" collector arm for swimming pools, 110 mm diameter. Groove gauge 0.3 mm. (Pack of 8)

Collector arm for sand pool filters. The function of the strainers is to collect the water from the bottom of the filter once it has been filtered. During backwashing, they lift the filter media and remove the debris retained in the filter system. It is recommended to completely empty the filter media from your pool filter every 8-10 years and check the strainers. Slot diameter: 0.3 mm.

Product features:

• For sand pool filters.

• The function of the sieves is to capture the water from the bottom of the filter once it has been filtered.

• During filter washing, they are responsible for lifting the filter load and evacuating the waste retained in the treatment plant.

• Every so often (8-10 years) it is recommended to completely empty the filter media of your pool filter and check the existing filter nozzles.

• Slot gauge: 0.3 mm.

Frequently Asked Questions:

What is the function of the strainers in a pool filter?
The filter nozzles collect the water from the bottom of the filter once it has been filtered.

How often is it recommended to empty the filter media?
It is recommended to do it every 8-10 years.

What size slot do the crepines have?
The groove gauge is 0.3 mm.

What type of filters are crepe filters suitable for?
They are suitable for sand pool filters.

What do the crepins do during filter washing?
They lift the filter load and evacuate the waste retained in the treatment plant.