3/4" collector arm for swimming pools, 225 mm. Groove gauge 0.3 mm. (Pack of 8)

For sand pool filters. The function of the filter nozzles is to draw water from the bottom of the filter after it has been filtered. During backwashing, they lift the filter media and remove the debris retained in the filter system. It is recommended to completely empty the filter media from your pool filter every 8-10 years and check the filter nozzles. Slot size: 0.3 mm.

Product features:

• For sand pool filters.

• The function of the filter nozzles is to collect the water from the bottom of the filter once it has been filtered.

• During filter washing, they are responsible for lifting the filter load and evacuating the waste retained in the treatment plant.

• Every so often (8-10 years) it is recommended to completely empty the filter media of your pool filter and check the existing filter nozzles.

• Slot gauge: 0.3 mm.

Frequently Asked Questions:

What is the function of the strainers in a pool filter?
The filter nozzles have the function of collecting the water from the bottom of the filter once it has been filtered.

How often is it recommended to empty the filter media from the pool filter?
It is recommended to completely empty the filter media every 8-10 years and check the existing filter nozzles.

What gauge slot do the nozzles on this collector arm have?
The groove diameter of the crenellations is 0.3 mm.

What type of pool filters are these strainers suitable for?
These sieves are suitable for sand pool filters.

What function do the filter nozzles perform during filter washing?
During filter washing, the sieves lift the filter media and evacuate the waste retained in the treatment plant.