Two-component epoxy putty with ultra-fast hardening, maximum resistance and great adhesive strength

Two-component epoxy putty with ultra-fast hardening (approx. 3 minutes). Maximum resistance and great adhesive strength. Hardens dry or wet. Suitable for contact with drinking water. Easy to mix and apply by hand. Emergency or permanent repairs of metal or PVC pipes, water tanks, leaks in connections, valves and joining pieces. Also suitable for repairing tiles, ceramics, bricks, etc. Fixing bolts, screws, nails, rods, etc. Not recommended for use on polyethylene or polypropylene. The surfaces to be repaired must be free of dust, oil or grease. Cut the desired amount of putty and mix it by kneading it with your fingers until the putty is a uniform colour (grey). Apply the putty to the area to be repaired within two minutes of mixing it. Press the putty into any crack, groove or hole to be plugged. For better adhesion, and whenever possible, it is recommended to sand the surface to be repaired beforehand. For an even finish rub with a damp cloth or with fingers moistened with water. The texture of the putty is slightly sticky, but it does not adhere aggressively to the fingers. It is recommended that to minimise stickiness you dust your hands with talcum powder or similar before kneading the putty. Remove excess putty before it hardens. Clean with solvent. Once hardened, the putty forms a bond of maximum strength and can only be removed mechanically.

Product Features:

• Two-component, ultra-fast hardening epoxy putty
• Maximum resistance and great adhesive force
• Suitable for contact with drinking water
• Easy to mix and apply with your hands

Frequently Asked Questions:

How should epoxy putty be applied for best results?
Cut the desired amount of putty and mix it by kneading it with your fingers until the putty is a uniform color (gray). Apply the putty to the area to be repaired within two minutes of mixing it. Press the putty into any cracks, grooves or holes you want to fill.

What surfaces is this epoxy putty recommended for use on?
This epoxy putty is recommended for use on metal or PVC pipes, water tanks, leaks in connections, valves and joints. It is also suitable for repairing tiles, ceramics, bricks, etc.

How should epoxy putty be cleaned once it has hardened?
Once hardened, the putty forms a bond of maximum strength and can only be removed mechanically. It is recommended to clean it with the appropriate solvent.

Can this epoxy putty be used on wet surfaces?
Yes, this epoxy putty is suitable for curing on both dry and wet surfaces.

What is the drying time of epoxy putty?
Epoxy putty has a drying time of approximately 3 minutes.