Two-Component Epoxy Putty with Ultra-Fast Hardening | High-Strength Repair and Adhesion

Two-component, ultra-fast hardening epoxy putty (approx. 3 minutes). Maximum strength and high adhesive power. Hardens dry or wet. Suitable for contact with drinking water. Easy to mix and apply by hand. For emergency or permanent repairs of metal or PVC pipes, water tanks, leaks in fittings, valves, and connecting pieces. Also suitable for repairing tiles, ceramics, bricks, etc. For securing bolts, screws, nails, rods, etc. Not recommended for use on polyethylene or polypropylene. Surfaces to be repaired must be free of dust, oils, or grease. Cut off the desired amount of putty and mix it by kneading with your fingers until the putty is a uniform color (gray). Apply the putty to the area to be repaired within two minutes of mixing. Press the putty into any cracks, grooves, or holes to be sealed. For better adhesion, and where possible, it is recommended to sand the surface to be repaired beforehand. For a uniform finish, rub with a damp cloth or moistened fingers. The putty has a slightly sticky texture, but it should not adhere aggressively to the fingers. To minimize stickiness, it is recommended to dust your hands with talcum powder or similar powder before kneading the putty. Remove any excess putty before it hardens. Clean with solvent. Once hardened, the putty forms an extremely strong bond and can only be removed mechanically.

Product features:

• Two-component, ultra-fast hardening epoxy putty.
• Maximum resistance and great adhesive strength.
• Suitable for contact with drinking water.
• Easy to mix and apply by hand.

Frequently Asked Questions:

How should epoxy putty be applied for best results?
Cut off the desired amount of filler and mix it by kneading it with your fingers until it is a uniform (gray) color. Apply the filler to the area to be repaired within two minutes of mixing it. Press the filler into any cracks, grooves, or holes you wish to seal.

On what surfaces is this epoxy putty recommended?
This epoxy putty is recommended for use on metal or PVC pipes, water tanks, leaks in fittings, valves, and connecting pieces. It is also suitable for repairing tiles, ceramics, bricks, etc.

How should epoxy putty be cleaned once it has hardened?
Once hardened, the putty forms an extremely strong bond and can only be removed mechanically. Cleaning with the appropriate solvent is recommended.

Can this epoxy putty be used on damp surfaces?
Yes, this epoxy putty is suitable for hardening on both dry and damp surfaces.

What is the drying time for epoxy putty?
Epoxy putty has a drying time of approximately 3 minutes.