...

Pass valve for drip irrigation. Measure 16mm. High quality drip irrigation stop valve made in Italy. Drip irrigation accessory made in Italy, top quality. <span...

Radius range 1 to 1.2 meters. Flow rate from 75 to 123 l / h. 360º irrigation microdiffuser. Recommended water pressure 0.5 to 1.5 bar. ...

360º circular angle. Radio reaches 5.2 to 7.3 meters. Pressure 2.1 to 3.8 bar. Convert your diffuser into a sprinkler with this nozzle. The arc and radius of throw are adjusted when the diffuser is in operation. The rotating nozzles provide efficiency to the irrigation system, reducing water consumption and flow. Highly recommended in installations...

Pack 5 irrigation diffusers WITHOUT nozzle. 1/2 "female thread. Emergency height 30 cm. Body height 40 cm. Operating pressure from 1 to 2.1 bar. Small top, which makes the diffuser not visible once...

• Pipe used to install sprinklers and irrigation diffusers in the irrigation network. • Simplicity: thanks to its unique material, this pipe has great flexibility and greater resistance to kinking, making installation faster and easier. • Reel of 30 meters. ...

PE40 16mm pipe in 200 meter coil. It is a high quality pipe, made in Spain, whose main characteristic is its greater flexibility and thickness compared to <a...

40mm PE40 pipe in 100 meter coil. It is a high quality pipe, made in Spain, whose main characteristic is its greater flexibility and thickness compared to <a...

...

...

Replacement solenoid for Hunter solenoid valves. The solenoid allows the electric actuation of the solenoid valve and its perfect condition is essential for opening and shutting off the water flow. Original...

15 liter capacity skimmer with standard mouth and circular pressure cap for concrete pools. With anti-UV treatment in the parts that are not buried. Made of ABS, with gate float and clapper for flow regulation. Connections: Lower suction connection: internal thread 1½ ", external 2". Simultaneous connection to the drain: internal Ø 50...