Liquid Flocculant for Swimming Pools 5 Liters | Treatment for Cloudy Water and Water Clarification

Liquid product for swimming pools that binds suspended solids and causes them to precipitate. Recovery treatment: With the filtration system off and no bathers present, add 10 ml/1 m³ of water. Pour the dose into a container of water and distribute the solution evenly over the pool. After approximately 8 hours, collect and remove the layer of flocs that has settled at the bottom of the pool. Maintenance treatment: This can be carried out using a dosing pump, injecting 0.5 ml of product per m³ of circulating water before the filter. Composition: Aluminum sulfate hydroxide chloride.

Product features:

• Liquid product for swimming pools.
• It improves the bacteriological quality of the water.
• Recovery and maintenance treatment.
• Composition: Aluminum sulfate hydroxide chloride.

Frequently Asked Questions:

How is liquid flocculant applied to treat cloudy water?
The recommended dose should be added to a container of water and distributed evenly throughout the pool.

What is the composition of the liquid flocculant?
The liquid flocculant is composed of aluminum sulfate hydroxide chloride.

How long should you wait before collecting the flocs that have settled at the bottom of the pool?
After approximately 8 hours, the floc layer can be collected and removed.

Can liquid flocculant be used in large swimming pools?
Yes, the dose can be adjusted according to the volume of water in the pool.

Is it safe for swimmers to use the pool after applying the liquid flocculant?
It is recommended to wait until the treatment has taken effect and the flocs have been eliminated before allowing access to bathers.