Drip irrigation tape 16mm 2600 meters

Drip irrigation tape 16mm 2600 mts. Gauge thickness 8 mil. Drippers 1.5 l/h every 20 cm

Ideal use for:

• Nurseries for fruit plants, hawthorn nurseries, nurseries for green areas. They are generally well suited to specialised horticulture (strawberry), potato, tomato, melon, eggplant, asparagus, seed cultivation, small fruits, etc., due to their ease of implementation.



• On a par with the measurements, it is significant that the solution allows for good distribution uniformity at a low installation cost, mainly due to the fact that the primary lines are made with lay flat tubes (flattened tubular sheet) and all the connecting parts are made of plastic material.

Features

• Gauge 8000, 8 thousandths of an inch wall.



• Drippers spaced every 20 cm.



• Flow rate 1.1 l/h or 1.5 l/h. It will be sent according to manufacturing unless otherwise specified in comments.



• 2,600 mts coil

Protected exit

The new protected outlet system developed by the research office allows the P1 to be buried underground, eliminating problems of mud and debris suction and minimising the possibility of root intrusion. The system operates through a “window” obtained by a particular design of the outlet hole. During the irrigation cycle, the window is raised and ensures the regular outlet of water. At the end of the irrigation cycle, the window returns to its rest position, closing the outlet hole and therefore stopping any infiltration of mud and debris.

Integrated-extrusion technology

• The flat dripper, just 2 mm thick, eliminates this and is welded to the tube wall, virtually eliminating all pressure losses.



• The labyrinth inlet filter, equipped with eight passage holes, excludes the possibility of obstructions.



• The turbulent flow labyrinth with a new profile for high emission uniformity eliminates the possibility of sedimentation even at low operating pressures.