Digital garden timer that controls an irrigation zone. It connects to the 3/4 "thread of your garden tap. This easy-to-use digital controller allows you to automate sprinkler irrigation, a drip irrigation system, or buried pipes.  ...

Tap programmer with manual watering. It stands out for its simple handling as it is possible to adjust all the parameters (frequency, duration, delay, ... etc) just by means of a button. 12 preconceived irrigation programs, adjusted to the typical needs of any drip...

With a programmer we will not have to be so aware of the irrigation, ensuring the constant humidity of the substrate, although we will have to adjust its variables at each time of the year. We always recommend short waterings more frequently, better than long waterings...

Analog tap programmer used in gardens or terraces. Watering time from 1 minute to 120 minutes. Irrigation frequency by hours, days and weekly. Uses 2 AAA 1.5 volt batteries not...

Analog tap programmer used in gardens or terraces. It can also be used in irrigation hoses directly, stopping irrigation when the time reaches 0. Irrigation frequency from 0 to 120 minutes. 3/4 "and 1" threaded garden...

Cepex analogue tap programmer with easy and direct programming for residential irrigation. Easy to program with  manual selectors of duration and irrigation cycle . Special connection for ¾ "garden tap (inlet ¾" female and outlet ¾ "male). Easy programming with manual selectors. ...

Cepex digital tap programmer with ¾ "H thread  very easy to program  by dial. Programmable watering frequency  with multiple watering time options. It works with 2 AA alkaline batteries (not included).

Tap programmer managed from mobile phones or tables through a multi-language application that communicates with the programmer via bluetooth with a range of 10 meters. 3/4 "tap thread. Start and stop of annual irrigation by application and / or physical button with automatic shutdown after one hour. 2 Starts per day and irrigations from 1 minute to 6 hours. ...

1 irrigation station tap programmer with digital display. Watering times from 1 to 240 minutes. The irrigation interval can be programmed between every 6 hours. 12 hrs or intervals of 1 to 7 days. Pressure between 0.7 and 5.5 bar. Rosca 3/4". Rain delay of 24...

2 irrigation stations tap programmer with digital display. Watering times from 1 to 240 minutes. The irrigation interval can be programmed between every 6 hours. 12 hrs or intervals of 1 to 7 days. Pressure between 0.7 and 5.5 bar. Rosca 3/4". Rain delay of...

1 watering station analog non-pressure tap programmer. Very easy to use. 3/4 "female thread Watering times from 1 to 120 minutes. The watering interval can be programmed from 1 hour to 7 days. ...

Digital tap programmer for seconds up to 6 hours, for 1 irrigation station. 3/4 "female thread. Irrigation cycle every 10 s, 30 s, 1 min, 3 min, 5 min, 1 h, 2 h,...